All manuals and user guides at all-guides.com
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refe-
rences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Spare parts/Accessories
Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre (see "Grizzly
Service-Center"). Please have the order number mentioned below ready.
Battery 40 V; 2.5 Ah ...........................................................................................80001176
Battery charger ................................................................................................. 80001097
Spare blade set 51 cm...................................................................................... 13700453
www.grizzly-service.eu
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under actu-
al usage conditions (all parts of the
operating cycle are to be conside-
red, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
GB
41