Sharp FO-5800 Mode D'emploi page 72

Broadcasting
• Enter one or more full fax numbers
with the numeric keys (max. 20
digits per full number), pressing the
START key after each full number.
(Maximum of 20 destinations; less
if a large number of programs,
timer operations, and/or group keys
have been stored.)
• Press one or more Group Keys.
(See Storing numbers in Group
Keys at the end of this section.)
4
Press the START key.
The display will show:
BROADCAST MODE
SELECT THE MODE
• If desired, adjust the resolution and/
or contrast.
5
Press the START key twice.
Transmission will begin.
• A Transaction Report is
automatically printed out after
Broadcasting is completed. Check
the "Note" column of the report to
see if any of the locations are
marked "Busy" or have a
communication error code. If so,
send the document to those
locations again.
70
All manuals and user guides at all-guides.com
START
RESOLUTION
CONTRAST
Q
START