Sharp FO-5800 Mode D'emploi page 19

Attaching the document OUT tray
Insert the protrusion on the right side of the machine into the hole in
the right side of the document OUT tray as shown, then bend the tray
slightly and insert so that the protrusion on the left side of the machine
goes into the hole on the left side of the document OUT tray.
Attaching the received document tray
Slide the received document tray into the machine as shown. When it
stops, lift the end slightly and push in so that the tray locks into place.
Make sure the left edge of
the tray fits into the slot.
Important!
The received document tray must be attached for the fax machine to
operate properly.
All manuals and user guides at all-guides.com
Connections
Pull out the tray
extension.
17