Sharp FO-5800 Mode D'emploi page 88

Relay Request
6
Press the START key to send the
document through memory, or the
DOCUMENT key to send the
document directly from the feeder.
Relay Broadcast
The fax machine can also act as a relay station. It will receive a
document from a fax machine requesting a relay transmission, and
automatically broadcast it to the stations that the requesting machine
specifies.
To enable a fax machine to request a relay transmission, you must first
enter its fax number in the Relay Passcode List. Follow the steps
below to enter or clear a fax number.
♦ When your fax receives a relay request from another fax machine,
RCVD RELAY REQUEST will appear in the display.
♦ If the telephone billing function is turned on, the fax machine can-
not act as a relay station.
♦ To clear a fax number from the Relay Passcode List, you need to
know the 2-digit number which identifies it. You can check this
number by printing out the Passcode List (see Chapter 7).
1
Press these keys:
The display will show:
4:RELAY PASSCODE
1=SET, 2=CLEAR
86
All manuals and user guides at all-guides.com
START
DOCUMENT
or
RELAY
4
U