Sharp FO-5800 Mode D'emploi page 152

Optional Settings
Setting 18: RETRANSMISSION INTERVAL
You can select the number of minutes the fax waits between each
memory retransmission attempt. Enter 01 for 1 minute, 02 for 2
minutes, etc., up to a maximum of 15 minutes. If you do not want the
fax to wait between attempts, enter 00.
♦ Initial setting: 02
Setting 19: HEATER MODE
To conserve power, you can turn off the laser printer heater in your fax
machine. When this is done, the heater will turn on automatically
when you receive a document (there will be a slight delay before
printing while the heater warms up) and turn off when printing is
completed. Press 2 to turn off the heater, or 1 to keep it on.
♦ Initial setting: 2
Setting 20: ANTI-JUNK FAX
Press 1 to block reception from fax numbers entered in the Anti Junk
Fax List. Press 2 to allow reception from all numbers.
♦ Initial setting: 2
Setting 21: ALARM VOLUME
This sets the volume of the beep sound that alerts you to error
conditions and informs you that operations have been completed.
Press 1 for HIGH, 2 for LOW, or 3 for OFF.
♦ Initial setting: 2
Setting 22: DIAL MODE
This sets the dial mode. Press 1 if you are on a touch-tone line, or 2 if
you are on a pulse dial (rotary) line.
♦ Initial setting: 1
150
All manuals and user guides at all-guides.com