Antari HZ-500 Mode D'emploi page 4

This product is for use on a nominal 120-V circuit and has a grounding plug similar to the
plug illustrated in sketch A in the following Figure. Only connect the product to an outlet
having the same configuration as the plug. Do not use an adapter with this product.
Use only a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot
receptacle that accepts the plug on the product. Make sure your extension cord is
not damaged. When using an extension cord, be sure to use one heavy enough to
carry the current your product draws. For lengths less than ___ ft, ___ AWG
extension cords shall be used. An undersized cord results in a drop in line voltage
and loss of power and overheating.
Danger of Burn
▪ No user serviceable and modifiable parts inside. Do not disassemble the housing
and do any modification; otherwise damage of the device or danger of burn may
be caused.
▪ For adult use only. Hazer must be installed out of the reach of children. Never
leave the unit running unattended.
▪ Position the haze machine in well-ventilated area. Please leave about
20 cm spaces surrounding the machine.
▪ Never aim the machine at open flames or close to flammable items.
▪ Never add flammable liquids of any kind (oil, gas, perfume) to the hazer liquid.
▪ Use only dealer recommended ANTARI high-quality hazer liquid (HZL). Please
do not use any other liquid which may cause erosion of inner parts.
▪ If your ANTARI HZ-500 Hazer fails to work properly, stop using immediately.
Drain all hazer liquid from the tank, pack the unit securely (preferably in the
original packing material), and return it to your ANTARI dealer for service.
▪ Please note before sending the machine for transporting purpose, make
sure the haze fluid tank is empty.
4