4.0 Installation
The product is heavy! Ensure you have help when positioning
and installing it.
Make sure that the door to the burn chamber is closed during
installation so that the product is not nose-heavy. The product
must be secured so that it does not topple over while you are
installing it.
The product is supplied together with 2 manuals:
•
Jøtul FS 84 Advance
•
Jøtul F 370 Advance
Use the acrylic sealant provided for all joints.
4.1 Prior to installation
•
The standard product is supplied in two packages: the
burn chamber and surround with mounting sections.
•
Control handle set.
Before installing the fi replace, check it carefully for any signs
of damage.
Preparations
•
Before a hole is made in the chimney, the product should
be test-mounted in order to correctly mark the position of
the fi replace and the hole in the chimney.
•
When the product is unpacked, take out the ash pan and
its contents, the fi re grate, burn plates, baffl e and exhaust
defl ector. These parts are to be reinstalled when the
installation is fi nished.
•
Remove the top plate with the grate. These parts are not
to be used.
ENGLISH
7