Jotul FS 84 Advance Manuel D'installation Et D'utilisation page 29

Fig. 11
13. Adjust the burn chamber to fi t the hollow (A) on the inside
of the rear plate.
Fig. 12
B
14. Push the thread bar (A) (fi g. 1 – part 2) through the hole
in the base and lock it underneath with a nut and washer.
Then slide the connection angle (B) (part 8) onto the
thread bar and hook it onto the insert. Lock in place with
nut. NB! Tighten the nut carefully.
Fig. 13
A
15. Move the side frames into position (A) (fi g. 1 - parts 17 and
16. Put the ash retainer in position (B) (fi g. 1- part 23).
Fig. 14
A
17. Position cowl 1 in the slots. NB: When top-mounting a
A
B
18). NB: The side frames must be fl ush with the base
(fi g. 1 - part 1). Secure in place using acrylic adhesive.
fl ue pipe, glue the sealing plug (fi g. 1 - part 13) in place
using acrylic adhesive.
ENGLISH
A
29