AFG 3.1AT Manuel Du Propriétaire page 10

5.1AT ASSEMBLY STEP 1
5.1 AT
ONLY
SCREWS (D)
SCREWS (L)
MAIN FRAME BOOT
MAIN FRAME
10
All manuals and user guides at all-guides.com
HARdWARE fOR STEP 1 :
BOLT (A) SPRING WASHER (B)
20 mm 8.2 mm
Qty: 6 Qty: 6
ARC WASHER (C) SCREW (D)
8.2 mm 12 mm
Qty: 6 Qty: 8
* This step is for 5.1AT models only. For 3.1AT models,
proceed to page 12.
A Cut the yellow banding straps and lift the running
deck upward to remove all contents from underneath
the running deck.
B Open hardware for step 1.
C Place main frame boots over main frame as
shown.
D Attach main frame boots to main frame
using 8 screws (d) from above and 2 screws
(L) from the front.
SCREW (L)
20 mm
Qty: 2