Technical Data - Kospel EPJP Serie Mode D'emploi

Faults
In case the heater does not heat the water, check for possible reasons:
- a failure of the mains supplies (e.g. fuses),
- insufficient flow rate through the heater (e.g. dirty filter, incorrect setting of the
flow regulating valve) - see „Flow regulation".
The warranty does not cover the above repairs.
If there is a fault in the appliance (the heater does not work and all the above reasons
do not occur), contact the seller.

Technical data

Water heater EPJ.P Primus
Rated power
Rated voltage
Rated current
Min. supply water pressure
Safety class
Operating point
Efficiency (at Δt = 30°C)
Overall dimension (height without tap set x width x depth)
Weight (heater + fittings)
Connection to the mains by supply cord (1,2m)
The maximum allowed network impedance
Water supply pipe section
EPJ.P - ...... - shower
EPJ.P-....u - shower + washbasin
18
4,4
kW 4,4
230V~
A 19,1
MPa 0,12
IP25
l/min 1,8
l/min 2,1
mm 218 x 214 x 95
kg 2,2 ÷ 0,6
mm 3 x 2,5
2
Ω 0,44
G1/2"
5,5
5,5
23,9
2,2
2,7
0,31