ATIKA MHB 40 Notice Originale - Consignes De Sécurité - Pièces De Rechange page 18

You may not start to operate the machine until you
have read these operating instructions, observed all
the instructions given and installed the machine as
described!
Keep the instructions in a safe place for future use.
Contents
Extent of delivery
EC Declaration of Conformity
Symbols on the machine / original instructions
Operating times
Proper use
Residual risks
Vibrations (hand-arm-vibrations)
Safety Precautions
Personal protective equiment
−
− Safety instructions – before working
Safety instructions – operating
−
− Safety instructions – while working
General safety instructions
−
− Safety instructions for the hoeing machine
− Behaviour in an emergency situation
− Safe handling with fuels
Description of device / spare parts
Assembly
Preparing for startup
Engine oil
−
− Gasoline
Start-up
− Starting with cold engine
Stopping the engine
−
− Starting with warm engine
Before start of work
Working with the hoeing machine
− Adjustments
− Work instructions
− Start of work
Maintenance and cleaning
−
Checking/changing the gear oil level
− Change engine oil
− Cleaning the air filter
−
Adjusting the clutch cable
− Clean or replace the fuel filter
− Checking/replacing the spark plug
− Checking the ignition spark
− Silencer
− Adjusting the carburetor (idle speed)
− Cleaning
Transport
Storage
Guarantee
Maintenance and cleaning schedule
Possible faults
Technical specifications
18
All manuals and user guides at all-guides.com
After unpacking, check the contents of the box for
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
18
18
• 1 Basic unit
19 • 1 Transport wheel
19 • 2 Hoeing tools
• 1 Steering handle RH/LH
19
•
20
• 1 Cover
20
• 1 Hoeing spur
20
• 1 Tool bag containing
20
21
21
21
• 1 Original operating instruction manual
21
• 1 Assembly and operating instruction sheet
22
• 1 Warranty declaration
22
22
22
23
No. (S-No.): 14136
23
23
23
according to EC directive: 2006/42/EC
24
We,
24
ATIKA GmbH
24
Josef-Drexler-Str. 8, 89331 Burgau - Germany
24
25
herewith declare under our sole responsibility that the products
25
MHB 40 / MHB 60 motor hoe
25
Serial Number: 000001 - 020000
25
are conform with the above mentioned EC directives as well as
25
with the provisions of the guidelines below:
26
2004/108/EC and 2000/14/EC.
26
Following harmonized standards have been applied:
26
EN 709:1997+A4:2009; EN ISO 14982:2009
27
Conformity Assessment Procedures:
27
(2000/14 EEC) - Appendix VI
27
27
28
28
28
Duly authorised person for the complilation of technical
28
documents:
28
ATIKA GmbH – Technical department – Josef-Drexler-Str. 8 –
28
89331 Burgau – Germany
28
29
Burgau, 17.12.2014
30
31
Extent of delivery
completeness
possible transport damage.
1 Console
- 1 Open-end wrench (size 14 and 17)
- 1 Phillips screwdriver
- 1 Spark plug socket spanner
EC Declaration of Conformity
MHB 40
14143 MHB 60
Measured sound power level L
WA
Guaranteed sound power level L
i.A.
i.A. G. Koppenstein,
MHB 40 MHB 60
91,4 dB (A) 92,5 dB (A)
93 dB (A) 93 dB (A)
PA
Engineering design management