Suction Nozzles; Assembly; Inserting/Removing The Suction Hose - Cleanmaxx C-320-70 Mode D'emploi

EN

Suction nozzles

ATTENTION!
■ Always turn off the vacuum cleaner fi rst before changing the nozzles.
Floor nozzle
Tile/brush nozzle

Assembly

ATTENTION!
■ Risk of suffocation! Keep the packaging material away from children and animals.
■ Make sure that the device is not connected to the mains electricity supply before you
attach or remove the accessories.
• Unpack all parts and make sure that the product contents are complete (see chapter
"Product contents and device overview") and check for any damage from transport.
If you identify damage to the components, do not use them (!), instead contact our
customer service centre.
• Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.

Inserting/removing the suction hose

The fl oor nozzle is suitable both for carpets and smooth fl oors.
With the foot switch, you can switch between smooth fl oor and
carpet. A brush is deployed on the bottom for smooth fl oors.
Turn the end piece in the direction of the arrow to convert the tile
nozzle into a brush nozzle:
• The tile nozzle is suitable for cushions, cleaning the inside of
passenger vehicles as well as all nooks and crannies that can't
be reached with other nozzles.
• The brush nozzle is suitable for all uneven objects, furniture,
lamps, profi ling strips and skirting boards, window sills etc.
• Insert the connection piece of the suction hose in the
suction opening on the device and turn it slightly clockwise.
It must audibly lock into place.
• To remove the suction hose turn it slightly anticlockwise
and pull the hose out at the same time.
18