Scope Of Delivery - Proxxon STS/E Manuel

Translation of the Original
GB
Operating Instructions
Super STS/E Jig Saw
Foreword
Dear Customer,
The PROXXON Super STS/E Jig Saw is an easy-
to-use but nonetheless high-performance device,
which produces excellent cutting results.
This instruction manual covers:
• Safety regulations
• Operation and maintenance
• Spare parts list.
Please read carefully.
The use of this instruction manual
• makes it easier, to become familiarised with the
device,
• prevents faults due to improper operation
• and increases the service life of the device.
Keep this instruction manual in an easily accessi-
ble place.
The instruction manual must be read before, and
observed during operation of the device.
PROXXON is not liable for the safe functioning of
the device:
• in the case of non-designated use or for pur-
poses
• other than those specified in the instruction
manual,
• if the safety regulations are not observed.
Warranty claims are invalid in the case of:
• improper operation,
• insufficient maintenance.
In the interests of your safety, please always
observe the safety regulations.
Use original PROXXON spare parts only.
We reserve the right to make further alterations
for the purpose of technical progress.
We wish you every success with your device.
- 8 -
Use indoors only
Protection class II device
Please do not dispose off the machine!
Risk of injury!
Never work without dust
protection mask and safety
glasses. Some dusts have a
hazardous effect! Materials containing asbestos
may not be machined!
WARNING!
Read all safety warnings and instruc-
tions. Failure to follow all safety warn-
ings and instructions listed below may
result in electric shock, fire and/or serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUC-
TIONS FOR THE FUTURE !
Key
1 Speed control knob
2 ON/OFF switch
3 Handle
4 Connection lead
5 Saw plate
6 Scale
7 Saw blade
8 Parallel stop
9 Piston with saw blade mount

Scope of delivery

1 pc. STS/E jig saw
1 pc. Storage case
1 pc. Operating instructions
1 pc. Safety guidelines
2 pcs. Jig saw blades of special steel, ground
and side set teeth (teeth division 1.5
mm). For cutting all types of wood, fibre-
glass sheets and soft plastics.
2 pcs. Jig saw blades of HSS steel, ground and
wavy set teeth (teeth division 1.06 mm).
For cutting of steel, non-ferrous metal,
GRP, pressed materials, resin bonded
fabric, Plexiglas and insulation material.