Hints & Tips - Breville Boss BBL910XL Manuel D'instructions

hINTS & TIPS hINTS & TIPS
hINTS & TIPS
• If the volume (while blending) is below
the maximum line, the inner measuring
cap can be removed and oils/liquids can
be added while blender is in use.
• Run the blender only for the appropriate
amount of time required – do not over
blend ingredients.
• Use the PULSE | ICE CRUSH button
when food is too thick or coarse to
circulate within the blender jug.
• The scraper spatula and frozen desert
wand can be used during blending by
removing the inner measuring cap.
Always make sure the main lid stays
firmly in place.
• Do not exceed the maximum mark
when adding foods and liquids into
the blender.
• Ingredients may stick to the sides of
the blender jug. To push food back onto
the blades with the main lid on (inner
cap removed), use the spatula provided
to scrape down the sides of the jug, and
continue blending.
• If any moisture or liquid appears on top
of the motor base during blending, turn
the blender off and unplug from the
outlet. Remove the blender jug, and wipe
motor base immediately with a dry cloth
or paper towel.
• To stop blending at any time or
during one of the programs, press
the START | CANCEL button.
12
• A speed or function can be selected
at any time, even while the blender
is running. Press the new speed or
program, and the blender will change
operation immediately.
• The maximum amount of ice cubes that
the blender can process is 250g (approx.
1 standard ice tray).
• Thicker mixtures puree more efficiently
if the jug is ¼ to ½ full.
• When the blender has been running
for 2 minutes in manual mode, it will
automatically turn off. This is a safety
feature to protect the motor.
• Do not use metal utensils, as they may
damage the blades or blender jug.