Timer Operation - Climadiff CLIMA18 Manuel D'utilisation

Timer operation

press the TIMER ON button can set the auto-on
time of the unit. And press the TIMER OFF button
can set the auto-off time of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The remote
SET TEMPERATURE( C)
AUTO
FAN controller shows TIMER ON, the last Auto-on
COOL
HIGH
setting time and the signal "h" will be shown on
DRY
MED
HEAT LOW
TIMER ON
the LCD display area. Now it is ready to reset the
Auto-on time to START the operation.
TEMP
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
ON/OFF FAN SPEED
MODE
the time increases in 30 minutes increments, up
SWING ECONOMY TIMER ON
to 10 hours, then at 1 hour increments up to 24
1
hours.
2
3. After setting the TIMER ON ,there will be a one-
half second delay before the remote controller
RESET LOCK TIMER OFF
transmits the signal to the air conditioner. Then,
LED
DISPLAY
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "h" will be shown on
the LCD display area. Now it is ready to
reset the Auto-off time to START the operation.
2. Push the TIMER OFF button again to set desired
Auto-off time. Each time you press the button,
the time increases in 30 minutes increments, up
to 10 hours, then at 1 hour increments up to 24
hours.
3. After setting the TIMER OFF ,there will be a one-
half second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
All manuals and user guides at all-guides.com
9
IMPORTANT
The effective operation time set by the remote controller for the timer
function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0,
3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13,
14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.
Example of Timer setting
TIMER ON
(Auto-on Operation)
h The TIMER ON feature is useful when you want
the unit to turn on automatically before say when
TIMER ON
you return home. The air conditioner will automa-
tically
Example:
Off
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of
6 hours later starting operation time and the signal "h" will
show on the display area.
2. Press the TIMER ON button to display "6:0h" on
the TIMER ON display of the remote controller.
3. Wait for about 3 seconds and the digital display
area will show the temperature again. Now this
function is activated.
10
start operating at the set time.