Indicators On Lcd - Climadiff CLIMA18 Manuel D'utilisation

Function buttons(continued)
NOTE: While the unit is running under SLEEP mode,
SET TEMPERATURE( F)
FAN it would be cancelled if ON/OFF, FAN SPEED, SLEEP
AUTO
COOL HIGH
or MODE button is pressed.
MED
DRY
LOW
HEA
10
TIMRT OFF Button
T
TEMP
Press this button to activate the Auto-off time
setting. Each press will increase the time setting
ON/OFF FAN SPEED
MODE
in 30 minutes increments, up to 10 hours, then at
SWING ECONOMY TIMER ON 1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until
TIMER OFF
RESET LOCK
the time setting is 0.0.
FOLLOW LED
ME DISPLA
Y 11
LOCK Button
Press this recessed button to lock all current
NOTE: RG51B/(C)EU models settings, and the remote controller will not accept
have no SWING and FOLLOW ME any operation except that of the LOCK. Use the
LOCK mode when you want to prevent settings
buttons ;RG51B1/(C)EU models
12
from being changed accidentally. Press the LOCK
have no FOLLOW ME button;
button again to cancel the LOCK function. A lock
RG51B30/(C)EU models have no
symbol will appear on the remote controller display
SWING ,FOLLOW ME buttons and
when the lock function is activated.
MED FAN feature,and SLEEP button
LED Display Button
instead of ECONOMY button; 13
Press this button to clear the display on the
RG51B31/(C)EU models have on
indoor unit, press it again to light the display .
FOLLOW ME button.
NOTE:
RG51B20/(C)E models have no this feature.
FOLLOW ME/TEMP SENSING Button
SET TEMPERATURE( F)
Press this button to initiate FOLLOW ME function.
When the Follow Me function is activated, the
remote display is actual temperature at its location.
The remote control will send this signal to the air
conditioner every 3 minutes interval until press
the Follow Me button again.
AUTO FAN
COOL HIGH The Follow Me function is not available under
MED
DRY
HEAT LOW DRY and FAN mode.
Switch the operation mode or turn off the unit will
TEMP
cancel the follow me function automatically.
ON/OFF FAN SPEED
MODE
14 ION Button
SWING SLEEP TIMER ON
When push this button, the ion generator is
9
TIMER OFF energized and will help to remove pollen and
ION RESET LOCK
TEMP LED
impurities from the air.
SENSING DISPLAY
impurities from the air.
13
14
All manuals and user guides at all-guides.com
RG51B18/(C)E ,RG51B19/(C)E-M,
5

Indicators on LCD

MODE display
MODE display
Displays the current selected mode. Including AUTO,
COOL, DRY, HEAT (cooling & heating models only)
and FAN.
Transmission Indicator
This transmission indicator will light when remote
controller transmits signals to the indoor unit.
Temp./Timer display
The temperature setting (from 17
30
If FAN mode is selected, there will be no display.
ON/OFF display
This indicator will be displayed when
the unit is operating.
MODE display(FAN mode)
SET TEMPERATURE
FAN SPEED display
Displays the selected fan speed: AUTO, HIGH, MED
and LOW. Nothing displays when the fan speed is
TIMER ON OFF
selected in AUTO speed. When AUTO or DRY Mode
is selected, there will be no signals displayed.
NOTE:
FOLLOW ME display
When pressing FOLLOW ME/TEMP SENSING button
in COOL or HEAT mode, the remote sensing function
is activated and this indicator displays. is activated and this indicator displays.
TIMER display
This display area shows the settings of the TIMER.
That is, if only the Auto-on time function is set, it will
display TIMER ON. If only the Auto-off time function
is set, it will display TIMER OFF. If both functions are
set, it will display TIMER ON OFF which indicates you
have chosen both the Auto-on time and Auto-off time.
LOCK Indicator
LOCK Indicator
LOCK display is displayed when pushing the LOCK
button. Push the LOCK button to clear display.
O O
C(62 F) to
O O
C(88 F)) or timer setting (0~24h) will be displayed.
RG51B19/(C)E-M model has no MED
FAN speed feature.
6