Remote Controller Specifications; Function Buttons - Climadiff CLIMA18 Manuel D'utilisation

CAUTIONS
Do not mix old and new batteries or batteries of a different type.
Do not leave the batteries in the remote controller if it is not going
to be used for 2 or 3 months.
Dispose of the old batteries in the special containers to be found
Dispose of the old batteries in the special containers to
in the sales outlets.
be found in the sales outlets

Remote Controller Specifications

RG51B1/(C)EU, RG51B14/(C)E,RG51B31/(C)E
RG51B/(C)EU, RG51B16/(C)E,RG51B31/(C)EU
Model
RG51B17/(C)EU, RG51B18/(C)E,RG51B32/(C)E
RG51B19/(C)E-M, RG51B20/(C)E,RG51B30/(C)EU
RG51B25/(C)E, RG51B26/(C)EU;RG51B27/(C)E,
RG51B30/(C)E,RG51B30/(C)EF
Rated Voltage 3.0V(Dry batteries R03/LR03×2)
Lowest Voltage of
2.0V
CPU Emitting Signal
Signal Receiving
8m
Range
。
-5 C ~ 60 C( -41 F~140 F )
-5 C° ~ 60°C ( -41° F~140°F )
Environment
Celsius scale( C):
RG51B14/(C)E, RG51B16/(C)E,RG51B18/(C)E,RG51B31/(C)E,RG51B19/(C)E-M,
RG51B20/(C)E,RG51B25/(C)E,RG51B27/(C)E,RG51B30/(C)E,RG51B32/(C)E,
RG51B30/(C)EF.
Fahrenheit scale( F):
RG51B/(C)EU, RG51B1/(C)EU, RG51B17/(C)EU,RG51B26/(C)EU,
RG51B30/(C)EU,RG51B31/(C)EU.
Performance Feature
1. Operating Mode: AUTO, COOL, DRY, HEAT (Cooling only
model without), and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17 C~30 C(62 F~88 F).
3. Indoor Setting Temperature Range: 17°C~30°C (62°F~88°F).
4. Full function of LCD (Liquid Crystal Display)
4. Full function of LCD (Liquid Crystal Display)
NOTE:
All the illustrations in this manual are for explanation purpose only.
Your air conditioner may be slightly different.The actual shape shall
prevail.
All manuals and user guides at all-guides.com
。 O O
。 。 O O
3
TEMP DOWN Button
1

Function buttons

SET TEMPERATURE( C)
AUTO FAN
COOL HIGH
DRY MED
HEAT LOW
TEMP UP Button
2
TEMP
2
Push this button to increase the indoor temper-
1
6
ature setting in 1
MODE ON/OFF FAN SPEED
7
3
SWING ECONOMY TIMER ON
4 8
9 3 MODE Button
TIMER OFF
RESET LOCK
5
10
LE D
DISPLAY
11
12
AUTO
Model: RG51B14/(C)E,RG51B16/(C)E,
RG51B18/(C)E,RG51B19/(C)E-M,
RG51B20/(C)E,RG51B31/(C)E
RG51B30/(C)E,RG51B32/(C)E
NOTE:
4
RG51B16/(C)E ,RG51B18/(C)E
models have no SWING feature;
RG51B18/(C)E ,RG51B19/(C)E-M,
RG51B20/(C)E models have no
5
LED DISPLAY feature.
RG51B19/(C)E-M model has no
MED FAN feature.
RG51B31/(C)E model ECONOMY button
is instead of SLEEP button.
RG51B30/(C)E model has no
6
MED FAN and SWING features.
RG51B32/(C)E model has no MED FAN,
SWING and ECONOMY features.
SET TEMPERATURE( C)
AUTO
7
FAN
COOL
DRY HIGH
HEAT MED
LOW
TEMP
2
1
6 Some models have no MED FAN feature
MODE ON/OFF FAN SPEED
7
3
SWING ECONOMY TIMER ON
8
8
4
9
TIMER OFF
ION RESET LOCK
10
14
LED
FOLLOW
ME DISPLAY
11
5
12
13
Model: RG51B25/(C)E;RG51B27/(C)E
RG51B30/(C)EF
NOTE:
RG51B25/(C)E model has no SWING
9 ECONOMY(SLEEP) Button
and FOLLOW ME features.
RG51B27/(C)E model has no FOLLOW ME
feature.
RG51B30/(C)EF model has no SWING and
ION features,ECONOMY button is instead
of SLEEP button
Push this button to decrease the indoor temper-
o o
ature setting in 1 ature setting in 1 C(2 F) increments to 30 C(2 F) increments to 30
o
C(2 F) increments to 17
Each time the button is pressed, the operation
mode is selected in the sequence of the following:
COOL DRY HEAT
NOTE: Do not select HEAT mode if the machine you
purchased is cooling only type. Heat mode is not
supported by the cooling only appliance.
SWING Button(on some models)
Used to stop or start louver movement and
set the desired up/down airflow direction.
RESET Button
Once the recessed RESET button is pressed,
all of the current settings will be cancelled
and the controller will return to the initial settings.
ON/OFF Button
Operation starts when this button is pressed
and stops when the button is pressed again.
FAN SPEED Button
Used to select the fan speed in four steps:
Auto Low Med High
Some models have no MED FAN feature.
TIMER ON Button TIMER ON Button
Press this button to activate the Auto-on time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-on time setting, just press the button until
the time setting is 0.0.
Select this function during the sleeping time. It
can maintain the most comfortable temperature
and save energy. This function is available on
COOL, HEAT or AUTO mode only.
4
o o
C(88 F). C(88 F).
o
C(62 F).
FAN