How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation; Dehumidifying Operation - Climadiff CLIMA18 Manuel D'utilisation

Masquer les pouces Voir aussi pour CLIMA18:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How to use the buttons

SET TEMPERATURE( C)
AUTO
FAN
COOL
HIGH
DRY
MED
Ensure the unit is plugged in and power is
HEAT
LOW
available. The OPERATION indicator on the
TEMP
display panel of the indoor unit illuminates.
1. Press the MODE button to select Auto.
2
3
2. Press the TEMP button to set the desired
MODE
ON/OFF FAN SPEED
1
temperature. The temperature can be set
ECONOMY TIMER ON
SWING
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
increments.
TIMER OFF
RESET LOCK
3. Press the ON/OFFbutton to start the air
LED
DISPLAY
conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
Dehumidifying by sensing the difference between the
actual ambient room temperature and the set temper-
ature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
SET TEMPERATURE( C)
Cooling /Heating/Fan operation
AUTO
FAN
COOL
HIGH
Ensure the unit is plugged in and power is
DRY
MED
HEAT
available.
LOW
1. Press the MODE button to select COOL, HEAT,
TEMP
(cooling & heating models only) or FAN mode.
2
2. Press the TEMP button to set the desired
4
MODE
ON/OFF FAN SPEED
temperature. The temperature can be set
1
3
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
SWING
ECONOMY TIMER ON
increments.
TIMER OFF
3. Press the FAN SPEED button to select the
RESET LOCK
fan speed in four steps- Auto, Low, Med,or High.
LED
DISPLAY
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
All manuals and user guides at all-guides.com

Auto operation

7
Ensure the unit is plugged in and power is
SET TEMPERATURE( C)
available. The OPERATION indicator on the
AUTO
FAN
COOL
HIGH
display panel of the indoor unit illuminates.
DRY
MED
HEAT
LOW
1. Press the MODE button to select DRY mode.
2. Press the TEMP button to set the desired
TEMP
temperature. The temperature can be set
2
3
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
ON/OFF FAN SPEED
MODE
increments.
1
ECONOMY TIMER ON
3. Press the ON/OFF button to start the air
SWING
conditioner.
TIMER OFF
RESET LOCK
NOTE
NOTE
LED
DISPLA
In the Dehumidifying mode, you can not switch
Y
In the Dehumidifying mode, you can not switch the fan
the fan speed. It has already been automatically
has already been automatically controlled.
controlled.
Use the SWING button to adjust the Up/Down
airflow direction .
1. When press the button once and quickly, the
SET TEMPERATURE( C)
AUTO
FAN
COOL
HIGH
DRY
MED
HEAT
LOW
TEMP
NOTE: On some models press it to initiate the Auto
ON/OFF FAN SPEED
MODE
2. If keep pressing the SWING button without
2. If keep pressing the SWING button without
SWING
TIMER ON
ECONOMY
1
TIMER OFF
RESET LOCK
LED
DISPLAY
NOTE: When the louver swing or move to a

Dehumidifying operation

Swing operation(on some models)
air flow direction setting feature of the louver is
activated. The moving angle of the louver is
o
6
for each press. Keep pressing the button to
move the louver to the desired position.
swing feature only.
releasing for 2 more seconds, the auto swing
feature of the louver is activated. The horizontal
louver would swing up/down automatically.
Press it again to stop.
position which would affect the cooling
and heating effect of the air conditioner,
it would automatically change the swing/
moving direction.
8

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Clima19

Table des Matières