Selection Of A Scenario With The Remote Control; Description Of The Functions Associated With Keys On The Remote Control - Schiller FRED easyport TRAINER Notice D'utilisation

6.3 Selection of a scenario with the remote control

The trainer has the possibility to select a scenario with the remote control when the device On.
Press on # key, slacken it, then press on the key corresponding to the selected scenario; the
indicator (10) of the remote control lights when a key is pressed.
Notes:
•
When the choice of the scenario is made during the initialization of the device (displaying of the
message "FRED easyport is testing"), this one is immediately taken into account.
•
When the choice of the scenario is made after the initialization of the device, this one is taken
into account with the next starting of the device.
In the case of the selection of scenario number 9, the device waits for the remote control's orders
to change it's status. If the device don't receive orders from the remote control, the shock will
always be recommended like in scenario 3.

Description of the functions associated with keys on the remote control

6.3.1
Key 0 Immediate move to the next step
Restart at the analysis step; reset of the counters of time and number of
Key 1
delivered shocks
Shock recommended, during the analysis in progress or during the next
Key 2
analysis
Shock not recommended, during the analysis in progress or during the next
Key 3
analysis
The rhythm has changed. This message appears after a recommendation
Key 4
of shock
Press on the electrodes (bad contact). This message appears during
Key 5
analysis
Movements detected. Stop movements. This message appears during
Key 6 *
analysis
Extinction of the device
Key 7
Key 8 Resume CPR. This message is immediately taken in account.
Pause : the current scenario is interrupted; the display is frozen. Press
Key 9
again on key 9 to continue the training.
* This function is not available on the defibrillator FRED easyport
FRED easyport TRAINER
Page 28
User guide