Scenario Selection Procedure; List Of Available Scenarios; Selection Of A Scenario On The Device - Schiller FRED easyport TRAINER Notice D'utilisation

6 Scenario selection procedure

6.1 List of available scenarios

Scenario 0
Scenario 1
Scenario 2
Scenario 3
Scenario 4
Scenario 5
Scenario 6
Scenario 7
Scenario 8
Scenario 9
Notes :
SNR Shock not recommended
SR Shock recommended
Elect fault Electrode fault
The last step of each scenario is indefinitely repeated.

6.2 Selection of a scenario on the device

•
Keep the orange SHOCK button (3) pressed while putting the device On with the green On/Off
button (1) to access in the configuration menu.
•
The selection in a menu is made by the blue ANALYSE button (2); the passage to the next step
in made by the orange SHOCK button (3).
•
Line 1: functioning mode of the device
• Line 2: choice between automatic and manual analysis
•
Line 3: selection of one of the scenarios (0 to 8) or selection of the remote control (scenario
9).
•
Line 4: saving of the selected configuration with the blue ANALYSE button (2): the device
goes Off.
Note: pressing longer than 3 seconds on the green On/Off button (1) puts the device Off without
saving the settings.
The device can then be switched on normally and it will operate according to the selected scenario.
FRED easyport TRAINER
SNR
SNR / SR
SNR / SR / SNR
SR
SR / SNR
SR / SNR / SR
Elect fault / SR
SR/ Elect fault / SR
SR / SR / SNR
Infrared control function
Page 27
User guide