Snowflake SKF 20 Manuel D'exploitation page 27

TIME-CONTROLLED HARD BLAST COOLING CYCLE
TIME-CONTROLLED BLAST FREEZING CYCLE
All manuals and user guides at all-guides.com
Use the Up and Down keys to set the duration of the time-controlled cycle.
Press the time-controlled blast cooling key to confirm the set value.
The display now shows the storing temperature.
The blast cooling icon remains on.
The storing icon and clock icon flash.
Use the Up and Down keys to set the desired storing temperature
Press the time-controlled blast cooling key to confirm the set value.
Press the Standby key to start the cycle.
Press the time-controlled blast freezing cycle key to select a time-controlled blast freezing
cycle. The clock icon and blast freezing icon flash. The display shows the minimum
temperature of the cabinet interior probe during the blast cooling.
Use the Up and Down keys to set the desired minimum room temperature.
Press the time-controlled blast freezing key to confirm the set value.
The display shows the cycle duration.
The blast freezing icon comes on. Clock icon remains flashing.
Use the Up and Down keys to set the duration of the time-controlled cycle.
Press the time-controlled blast freezing key to confirm the set value.
The display now shows the storing temperature.
The blast freezing icon remains on.
The storing icon and clock icon flash.
Use the Up and Down keys to set the desired storing temperature
Press the time-controlled blast freezing key to confirm the set value.
Press the Standby key to start the cycle.
27
ENGLISH