Re-Assembling The Coffee Group In Place; Cleaning The Group - Expobar Brilliance Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

16.5 Re-assembling the coffee group in place

To place the espresso group back in place, make sure that on the front side of the espresso group,
Front side
When placing back in place the espresso group, begin by (1)
inserting the axle of the group in the axle adapter. Once this axle
line up with the adapter axle, proceed to insert the (2) water
connection of the espresso group to the machine.

16.6 Cleaning the group

First, dismount the espresso group from the machine as explained in this manual. Then proceed to
clean it up with neutral detergents (avoid solvents that could damage paint or plastics). Disinfectant
products as Chlorine-detergents are preferred.
The producer declines all responsibilities due to the use of caustic/aggressive detergents.
Loose the screw shown on the picture as to open the easy - access to cleaning the group.
All manuals and user guides at all-guides.com
Rear
side
Supporting
Hooks
Axle
adapter
49
• Hygiene and maintenance
the mark on the group's axle,
match the outer triangle symbol .
This is the normal "wait" position
of the group in the machine.
When the machine is working
normally, the adapter to the group
will be waiting for the group in
Water
this position.
adapter
1
Rear
side
2
English

Publicité

Table des Matières
loading

Table des Matières