Rinsing; Launching The Rinsing Without Need Of The Key Of The Machine; Emptying Airbreak - Expobar Brilliance Mode D'emploi

14.10 Rinsing

The rinsing function facilitates a utility for a routine cleaning of the outlet conducts of the machine.
This utility flushes the different outlet conducts of the machine, beginning on the mixer conducts,
and finishing by the espresso group conducts.
Just press "enter" to execute this function, and wait till the cycle is over. Take
RINSING
into account that the door of the machine has to be closed (as long as it is open,
the actions of the cleaning will not take effect). The process can be canceled by
pressing "canc". When finished the process, the machine will come back to the settings menu.
This function takes about 1min 45secs, and pours around 150cc of water.
14.10.1

Launching the Rinsing without need of the key of the machine

-
K1
Canc
K2
K3
K4
+
K5
Enter
K6
K7
K8

14.11 Emptying airbreak

As to facilitate small transportations / movements of the machine, a function is available as to
reduce the amount of water in the AirBreak (the small, inner, open-air deposit), avoiding the
dripping inside the machine when moving.
To execute the function just press "enter". The process can be canceled by pressing
EMPTYING
"canc". When finished "EMPTYING completed" will be shown on the screen. To
return to normal functioning of the machine, turn off and again on the power.
Warning: Never use this function with empty airbreak. Making the pump work without water, will
damage it in a very short time.
All manuals and user guides at all-guides.com
The execution of the Rinsing can be launched without having to open the
door of the machine. As to do that:
• Turn the power off the machine from its main switch.
• With its door closed, turn on the machine, and simultaneously keep
pressed buttons K3 & K7. The rinsing process will begin shortly.
• Unlike if activated from the settings menu, when finished, the
machine will enter the normal functioning mode.
41
• Technical programming
English