Bartscher 105848 IK 20TC Mode D'emploi page 39

•
„Temp" and „Timer" indicator lights will come on. The time is counted down
at 1-minute intervals, whereas the digital display shows alternately the temperature
value and the remaining time.
•
When the set time runs out, an audio signal will sound and the device will be automati-
cally switched off. Only the cooling fan will continue working for ca. 45 seconds and
then it will switch off.
NOTE!
When in use, the time may be changed at any moment using the setting
adjustment field
allows for the set power or temperature levels to remain unchanged.
Power or temperature level may be set in the same way without changing
the set time. The device will function in accordance with the most recently
provided settings.
NOTE!
The device switches off automatically if the user does not change any
settings during 2 hours or if the time exceeding 120 minutes has been set.
Lock button
To lock the control panel, press and hold
The audio signal will sound and the indicator light over the lock button
as long as the control panel is locked.
The devices remains in the operation mode in accordance with the previous settings,
all buttons of the control panel are locked, except for the ON/OFF button
This may prevent accidental setting changes.
To unlock the device, again press and hold
The audio signal will sound and the indicator light over the lock button will go out.
•
When cooking or heating is finished, switch off the device using ON/OFF
button and disconnect the device from the socket (pull the plug!).
- 38 -
. The memory function of the device
button for 3 seconds.
button for 3 seconds.
will be lit
.