Bartscher 105848 IK 20TC Mode D'emploi page 38

•
Thanks to the device's memory function, the previously set power level will remain
unchanged.
•
„Power" and „Timer" indicator lights will come on. The time is counted down
at 1-minute intervals, whereas the digital display shows alternately the power
value and the remaining time.
•
When the set time runs out, an audio signal will sound and the device will be automa-
tically switched off. Only the cooling fan will continue working for ca. 45 seconds and
then it will switch off.
NOTE!
In order to stop the operation before the set time has expired, press ON/OFF
button . Press this button again to switch on the device and enter the
desired settings.
Temperature operation mode
•
To activate the temperature mode, press the function key
„Temp" indicator will be lit and the display will show the pre-set temperature
of 200 ° C .
•
By pressing the setting adjustment field
select one of 8 temperature settings within a range from 60 ° C to 240 ° C :
The digital display will show the desired temperature.
Temperature + time operation mode
•
When the device is in the temperature mode, press the function key
to time settings.
•
B
y pressing the setting adjustment field
the time within a range from 5 to 180 minutes.
•
Thanks to the device's memory function, the previously set temperature level will
remain unchanged.
60, 100, 120, 160, 180, 200, 220, 240 ° C.
.
left or right you can
to switch
left or right you can set
- 37 -