Hazard Sources - Bartscher 105848 IK 20TC Mode D'emploi

WARNING! HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
To avoid them please follow the instructions.
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
To avoid them please follow the instructions very carefully and proceed
with particular attention in these cases.
CAUTION! Magnetic field!
This symbol informs that the magnetic fields occurring during the device
operation may cause interference.
To avoid them please follow the instructions.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.

1.3 Hazard sources

DANGER! Electric shock hazard!
To avoid the hazard results please follow the instructions below.
Do not operate the device with the damaged supply cable or plug.
In any case do not open the device housing. In case of electrical or mechanical
modifications the electric shock hazard will occur.
Do not place any objects like wire or nails in the vantilation slots (air inlet and outlet).
Never immerse the device or plug in water or other liquids.
Never carry or lift the device by the supply cable.
- 24 -