Bartscher 105848 IK 20TC Mode D'emploi page 37

Power mode
•
Press the function key
Pre-set value of 1300 W is displayed.
The function key
„Power" and pan detection
•
If the function key
an audio signal will sound and the device will automatically switch to the
Standby mode.
•
The induction cooker detects whether the suitable cookware was placed on the hob.
If so, the pan detection indicator
selected settings.
•
If there is no cookware on the hob or if it is not suitable, or the cookware diameter
is smaller than 12 cm, the pan detection indicator
will sound until a suitable cookware is placed on the hob. If no suitable cookware is
placed on the hob within 30 seconds, the device will switch to the Standby mode.
•
When the device is in the power mode, by pressing the setting adjustment field
the range from 500 W to 2000 W.
8 levels can be set. They are listed below:
The digital display will show the selected power value.
Power + time operation mode
•
When the device is in the power mode, press the function key
settings.
•
By pressing the setting adjustment field
select one of the 8 time settings within a range from 5 minutes to 180 minutes:
- 36 -
. The device switches to the Power mode.
is lit constantly and the device is in the operation mode.
indicators are lit.
is not pressed within 1 minute,
left or right you can at any moment change the settings within
500, 700, 900, 1100, 1300, 1500, 1700, 2000 W
5, 15, 30, 50, 75, 105, 140, 180 minutes.
is lit and the device works based on the
flashes and an audio signal
to switch to time
left or right you can