Manual Setup - Samsung DVD-VR350 Manuel D'instructions

Manual Setup

PR 01
CH
◄ ►
Name
Decoder Off
MFT
System L/L'
Done
OK
MOVE
Manual Setup
If you have already set the stations automatically, you do not need
to preset them manually.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3. Press the ▲▼ buttons to select Install, then press the OK or ► button.
4. Press the ▲▼ buttons to select Manual Setup, then press the OK or
► button.
5. Press the ▲▼ buttons to select a PR (programme) you wish to edit,
delete, or swap, then press the OK or ► button. Select Edit, Delete or
Swap using the ▲▼ buttons, then press the OK or ► button.
• Edit : You can add or edit PR(programme). After change PR
informations (CH, Name, Decoder, MFT, System), select Done, then
press the OK button.
- CH : Tune the channel using ◄► buttons.
- Name : Display station name automatically detected in broadcasting signal.
If not detected, you can edit name by using ▲▼◄► buttons.
- Decoder : If you set on, you can record scrambled channels using
external decoder box.
Before setting on, refer to connecting external decoder box in the
page 16.
- MFT : You can tune up the channel frequency better using ◄►
buttons.
- System : You can select broadcasting system of the receivable
channel (B/G or L/L')
• Delete : the channel information of selected PR(programme) will be
removed.
• Swap : You can swap the channel information of two PR(programme).
For example, if you wish to swap PR2 and PR5, select swap at PR2,
then press the OK button at PR5.
English - 25