Samsung DVD-VR350 Manuel D'instructions page 74

DVD-Recorder Edit Scene
DVD-RAM(VR)
Scene No. 2 / 7 Playlist No. 3
Play
Modify
01 00:00:03 02 00:00:42 03 00:00:04
Move
Add
Delete
04 00:00:03 05 00:00:11 06 00:00:04
MOVE OK RETURN EXIT
DVD-Recorder Edit Scene
DVD-RAM(VR)
Scene No. 2 / 7 Playlist No. 3
Play
Modify
01 00:00:03 02 00:00:42 03 00:00:04
Move
Add
Delete
05 00:00:11 06 00:00:04
04 00:00:04
MOVE OK RETURN EXIT
DVD-Recorder Add Scene
DVD-RAM(VR)
Scene No. 002
Start End
Title List : 1/7
00:00:04 00:00:00
00:00:04
►
Start End Add Cancel
MOVE MOVE OK OK RETURN RETURN EXIT EXIT
DVD-Recorder Add Scene
DVD-RAM(VR)
Scene No. 002
Start End
Title List : 1/7
00:00:04 00:00:07
00:00:07 00:00:07
ІІ
Start End Add Cancel
MOVE MOVE OK OK RETURN RETURN EXIT
DVD-Recorder Edit Scene
DVD-RAM(VR)
Scene No. 2 / 8 Playlist No. 3
Play
Modify
01 00:00:03 02 00:00:03 03 00:00:42
Move
Add
Delete
04 00:00:04 05 00:00:03
06 00:00:11
MOVE OK RETURN EXIT
Moving a Scene (Changing the Position of a Scene)
Follow steps 1 to 3 on page 72.
4. Press the ▲▼◄ ► buttons to select the scene you want to move
(change the position), then press the OK button.
5. Press the ▲▼ buttons to select Move, then press the OK button.
• A yellow selection window is displayed on the scene to be moved.
6. Press the ▲▼◄ ► buttons to select the position to which you want to
move the selected scene, then select the OK button.
• The selected scene is moved to the selected position.
■ You cannot move the selected scene to the position of the next
scene, because the selected scene should be inserted before
that position, which requires no action.
■ Depending on the kind of disc, the displayed screen may be
slightly different.
Adding a Scene
Follow steps 1 to 3 on page 72.
4. Press the ▲▼◄ ► buttons to select the scene that will have a new
scene inserted before it, then press the OK button.
A yellow selection window is displayed on the scene to be added as
the new scene.
5. Press the ▲▼ buttons to select Add, then press the OK button.
The Add Scene screen is displayed.
6. Press the OK button at the starting point of the scene.
• The image and starting point time are displayed in the Start window.
• Select the end point of the section where you want to add the new
scene using the playback related buttons.
• Playback related buttons: (
7. Press the OK button at the end point of the scene.
• The image and time of the end point are displayed in the End window
• To cancel, press the ◄ ► buttons to select Cancel and then press
the OK button.
8. Press the ◄ ► buttons to select Add, then press the OK button.
• The section you want to add is inserted prior to the scene selected in
step 4.
English - 74
, , , , )