Samsung DVD-VR350 Manuel D'instructions page 17

▌ Case 2 : Connecting DVD Recorder & VCR
to a Satellite Receiver or Other Equipment
You can connect your DVD Recorder & VCR to a
Satellite receiver or other DVD Recorder & VCR
using the SCART cable if the appropriate outputs are
available on the equipment chosen.
The following illustrations give a few examples of the
connection possibilities.
1. AV2 IN (EXT): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other
equipment into the AV2 (EXT) jack on the rear of the
DVD Recorder & VCR.
After making this connection, select the source by
pressing the INPUT SEL. button for the AV2 input
sources.
2. AV1 (TV) : By means of 21-pin Scart Cable
Connect the end of the SCART cable to the AV1 (TV)
jack on the rear of the DVD Recorder & VCR. Plug
the other end into the appropriate connector on the
television.
Satellite Receiver or other
Equipment
TV
ANT
Aerial Connector
RF Cable
English - 17
Connecting the Audio/Video
Cable
You can connect your DVD Recorder & VCR to
the television using the audio/video cable if the
appropriate input is available on the television.
1. Connect one end of the video cable into the VIDEO
output jack on the rear of the DVD Recorder & VCR.
2. Plug the other end of the video cable into the
appropriate input connector on the television.
3. Connect one end of the audio cables supplied into the
AUDIO output jacks on the rear of the DVD Recorder
& VCR.
• Take care to respect the colour coding of the up and
down channels.
4. Plug the other end of the audio cables into the
appropriate input connectors on the television.
white
red
white
red