Palm m100 Serie Manuel D'utilisation page 21

All manuals and user guides at all-guides.com
I don't see anything on my handheld screen
Press an application button to ensure your handheld is turned on.
1.
Tap the Contrast icon
2.
writing area. If the Contrast dialog box appears, adjust the contrast
by holding down the Up scroll button for a few seconds. If this
doesn't work, hold the Down scroll button for a few seconds.
Make sure the battery is properly charged.
3.
Perform a soft reset. Use a
4.
paperclip to gently press the reset
button on the back of your
handheld.
If your handheld still doesn't turn
5.
on, perform a hard reset by
holding down the power button
while doing a soft reset. Wait for
the Palm Powered™ logo to
appear, and then release the power
button. If you want to continue
and erase all your data, press the
Up scroll button.
With a hard reset, all records and entries stored in your
IMPORTANT
handheld are erased. Never perform a hard reset unless a soft reset does
not solve your problem. You can restore any data previously
synchronized with your computer during the next HotSync operation.
See the electronic Handbook for instructions on restoring your data.
I can't complete a HotSync operation
The first step in diagnosing HotSync problems is to determine if your
handheld and computer are able to communicate with each other.
Connect your handheld to the HotSync cradle/cable.
1.
Confirm that HotSync Manager is running and enabled.
2.
Windows computer.
Palm Desktop icon, click the HotSync icon
make sure Local (USB or Serial, depending on the kind of
in the upper-right corner of the Graffiti
On the Windows desktop, double-click the
Troubleshooting
Reset
button
™ on the taskbar and
21