The spare parts list is located on our website www.conrad.com in the download section for the respective product.
You can also order the replacement parts list by phone. For contact information, please refer to chapter „1. Introduc-
tion" at the beginning of these operating instructions.
The following components not included in delivery are required for assembly and operation:
Assembly:
Soldering-gun, screw driver, different hex socket screwdrivers, threadlocker, pitch gage, hook and loop tape, cable
straps and double-sided adhesive tape (servo tape)
Operation:
You will require a 6-channel computer remote control with helicopter programmes (due to the short receiver aerials
preferably 2.4 GHz), a gyro, four standard-size servos, a speed controller (at least 60A permanent current) with inte-
grated BEC (at least 3A permanent current), a 4- to 6-cell LiPo flight battery with approx. 2700 mAh and a discharge
rate of 30 C, the respective plug connectors for speed controller and battery, and a suitable charger for the flight
battery. The rotor blades are also not part of the delivery and must be bought separately
The flight properties are very dependent on quality and performance features of the components to be
used. See our catalogues or our website at www.conrad.com for tried and tested accessories.
All manuals and user guides at all-guides.com
33