Maintenance; Maintenance Plan - HOLZMANN MASCHINEN ED 300FD Mode D'emploi

MAINTENANCE

Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the
machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!.
Store the machine in a closed, dry location.
Before first operation as well as later on every 100 operation hours you should lubricate all
connecting parts (if required, remove beforehand with a brush all swarfs and dust).
14.1

Maintenance plan

After each workshift:
 Remove dust and metal chips
After each 10 hours of operation:
By creasing:
 reduces the wear and friction resistance
 enhancing the life
 protects metallic surfaces from corrosion
We recommend:
 for the purpose grease lubrication of the class 2NLGI
All 10 hours of operation is to grease the lathe. The lubrication points bed management, dovetail-
cross slide dovetail-longitudinal slide and tailstock are using an oil can and a commercially
available lubricating oil under back and forth because of the carriage or the quill, greased.
All other lubrication points at the designated grease nipples using a oil ISO32.
This should be controlled and repeated at regular intervals.
The gear once a month with the right engine oil or fat.
This should be controlled and repeated at regular intervals.
Lubrication points:
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
A T T E N T I O N
N O T I C E
MAINTENANCE
34
ED300FD