Threading; Setting For Feed And Thread Pitches - HOLZMANN MASCHINEN ED 300FD Mode D'emploi

13.4.10 Threading

During operation, rotates the lead screw. When placing the shift lever feed / thread
downward, driving the sleigh

13.4.11 Setting for feed and thread pitches

Use it to select the longitudinal feed or feed plan, as well as for setting metric or English threads,
the corresponding tables that can also be found on the machine left.
INFO:
The change gears are depicted as substituted the letters and numbers of the table after.
INFO:
the change gears are as
depicted here, replaced
the letter of the table
after.
Thread pitch
1,5mm
 The gear spindle gear with 40 teeth thumbs up in gear A
 Gear A engages in gear C
A B 66 H
 Gear D meshes with gear F
C D 40 60
E F H 80
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
bed.
"H" stands for white space (sleeve). Instead of a sleeve can also smaller
gear are used, that is with no other gear is engaged.
OPERATION
(13)
32
ED300FD