Lift up the dust cover and rotate 90 °. Plug the dust cover to the housing
slot. Insert the secondary receiver audio accessory to 3.5 mm audio
jack.
2
Figure 2.11: Attaching secondary receiver audio accessory
Optional Accessories
Table 2.8: Optional Accessories
Part Number
Earpiece with Coiled Cord and 3.5 mm RT Angle
RLN4941_
RLN4885_
Receiver Earbud for Remote Speaker Microphone
NOTE:
Some part numbers may have regional prefix such as AA,
MD or AZ.
1
Description
Plug
Failure Detected Indication and Handling
Any product error is indicated by alternating Red and Green blinks and
a failure detected indication (tone / voice prompt) will be heard. A few
seconds later the WRSM will recover.
Troubleshooting
If at any time the wireless connection cannot be re-established, or the
WRSM is operating incorrectly:
Procedure:
1
Power cycle the WRSM and the two-way radio.
2
Refer to "Pairing Your WRSM" on page 10" to repeat the connection
process.
Firmware Upgrade
Firmware upgrade is available for this WRSM and it is only upgradeable
by your dealer. Check with your dealer for more information on the latest
firmware upgrades.
19
English