Push-To-Talk (Ptt) Button - Motorola Solutions PMMN4096 Guide De L'utilisateur

Table 2.5: Wireless Link and Pairing Indicators (Continued)
State Indication LED
Wireless Link
Blue LED Solid
Disconnected
ON
from Host
Poor Signal / Out Of Range Warning
Indication
You will be prompted with the Poor Signal / Ouf Of Range Warning
Indication if the WRSM is about to lose the wireless link at Bluetooth
fringe area.
This warning indication will turn off if the user moves closer or if the
signal quality improves.
Refer to Table 2.6 below for the Poor Signal / Out Of Range Indication:
Table 2.6: Poor Signal / Out Of Range Warning Indicator
State Audio Indication LED
Poor Signal / Amber LED illuminated for
Ouf Of Range 2 seconds
Tone
Voice Prompt
Indication
Disconnected
tone every "Headset
2 minutes Disconnected"
for 10 minutes
Tone Indication
"Bad Bonk" Tone

Push-to-Talk (PTT) Button

Press and hold down the PTT button to talk. Release the PTT button to
listen. The microphone is activated when the PTT button is pressed.
Figure 2.10: Pressing Push-to-Talk Button
Programmable Button (Orange Button)
For Portable Radios, the Programmable Button is mapped to the
Accessory Orange Button. Pressing the Programmable Button triggers
Accessory Orange Button to set event according to the mode being
programmed. For Broadband Push-to-Talk application, the Accessory
Orange Button can be assigned as emergency triggering feature.The
Accessory Orange Button is programmable through radio's Customer
Programming Software (CPS). Your radio User Guide contains a full
description of the programmable functions that are available through
this button.
17
English