Device Configuration; Connecting The Device To A Computer - ADEUNIS sigfox RC2 Guide Utilisateur

FIELD TEST DEVICE sigfox RC2 - Guide utilisateur / User guide version V1.0.0

5. DEVICE CONFIGURATION

The device can be configured using the USB connector. This connection allows you to communicate with the device via a virtual com port and
to transmit AT commands in order to modify the parameters of the device.

5.1. Connecting the device to a computer

Connect the Field Test Device (FTD) to the USB input of a computer. The FTD device has a Type B micro USB connector.
During connection, the device must be recognised by the computer as a Virtual Com Port (VCP) device.
Using Windows: Verification that the device has been recognised to be functioning properly can be obtained by consulting the device manager.
You should see the USB series device with a corresponding COM port number appear during connection.
If you are not able to see a device of this type, you must install the USB driver for this device, available to download from our website:
https://www.adeunis.com/produit/ftd-868-915/
Select:
• Driver USB-STM32_x64, if your computer is a 64 bits system
• Driver USB-STM32, if your computer is a 32 bits system
All manuals and user guides at all-guides.com
FR
EN
Page 39 of 44