Classe SSP-600 Manuel Du Propriétaire page 55

All manuals and user guides at all-guides.com
cautionary note on Fkey use Note that all Classé remote controls provide these same four Fkeys, so that you need not
status
version info The version info button on the status screen takes you to the version information
sensors The sensors button on the status screen takes you to the sensors screen, which displays
worry about which remote you happen to pick up. Thus F1 on the surround processor's
remote control sends the same infrared signal as F1 on the CD player's remote control.
While this is intended to minimize confusion amongst different remotes (since this
aspect of them will all perform identically), you should take care when assigning
different functions on different components to the same Fkey. Doing so would result
in two components doing two different things at once, in response to a single press of a
button on the remote control. This can sometimes be useful. As an example, F1 could
set the surround processor to the CD input, and also set the CD player to Play, both
from the press of a single Fkey.
The status screen provides several items of information about the current operation
status of the SSP-600, as well as access to information on the software used in and the
internal sensors of the SSP-600.
screen, which displays information on various pieces of software used by your SSP-600.
If you ever have occasion to call our technical support people to ask a question not
covered in this manual, they may want to know precisely what version of software your
unit is running. Having this information available will help enable them to give you the
best possible service.
information about several internal sensors within the SSP-600. It is unlikely you might
need the sensor information, unless directed to do so by a customer service representative
at Classé in order to help troubleshoot some unexpected problem.
55 55 55