Classe SSP-600 Manuel Du Propriétaire page 50

triggers setup Each of the SSP-600's DC triggers may be programmed to either "logic" (12V) or
teach IR
50 50 50
All manuals and user guides at all-guides.com
"inverse logic" (0V) settings. The ability to change the way the trigger operates can solve
installation-specific problems that otherwise require external devices that add to both the
cost and complexity of your system.
For more information on the use of DC triggers, we recommend you speak with your
authorized Classé dealer.
The SSP-600 provides discrete infrared (IR) command codes for all its functions, a list
that extends far beyond what is required by normal remote controls. However, many of
these functions are critical if you plan to create a customized remote control with macros
that take command of your entire system. Without these discrete codes, many of the
macros you might want to create will simply not work reliably.
The teach IR screen provides a scrolling list of all the available IR codes in the SSP-
600. By scrolling to the command you need to learn into your macro-capable remote,
and then pressing the send IR code button, the SSP-600 will continue to send the
appropriate command code out of its front panel-as long as the button is pressed–where
it can be learned by your third-party remote control.
For more information on such control systems, we recommend you speak with your
authorized Classé dealer.