Classe SSP-600 Manuel Du Propriétaire page 30

Danger!
30 30 30
All manuals and user guides at all-guides.com
Note that the three analog video standards offer varying degrees of performance:
• Component video offers the highest picture quality
• S-Video is second-highest in picture quality
• Composite video offers the lowest picture quality
For this reason, you are advised to use component video connections whenever
possible, and S-video connections when component is not available. Composite
video connections should be used when the other options are not available, or on
less critical sources (e.g., a VHS video cassette recorder, or perhaps a video game).
The Component OUTPUT makes the selected video signal available to your
main display in a Component video format, regardless of the format in which it
was received by the SSP-600. This includes both standard definition and high
definition video signals.
For your convenience, all standard definition Component video signals are
converted to S-video and composite video for display via this output.
BYPASS MODE: In order to preserve the highest-possible signal integrity on the
Component video path, no On Screen Display is available.
21 AC Mains Power Switch
The main power switch for the SSP-600 is adjacent to the receptacle for the power
cord.
Switching the unit on puts it in standby mode. The surround processor should be
in standby before being switched off.
Potentially dangerous voltages and current capabilities exist within your
surround processor, even when disconnected from AC mains. Do not
attempt to open any portion of the surround processor's cabinet. There
are no user-serviceable parts inside your surround processor. All service
of this product must be referred to a qualified authorized Classé dealer
or distributor.
22 AC Mains Input
An IEC standard power cord (supplied) is used with the SSP-600. Plug the cord
into the IEC receptacle provided, and the other end into a suitable wall outlet.