Classe SSP-600 Manuel Du Propriétaire page 52

language The language menu offers you any of six different languages supported by the SSP-
Important Note!
temp. display The temp. display button leads to a screen on which you may select how long the
52 52 52
All manuals and user guides at all-guides.com
If you prefer the display of the SSP-600 to remain on whenever not in standby, choose
the never timeout setting. The lamp in the LCD display was designed for harsh
automotive environments and will give you many years of reliable operation. If you plan
to leave the unit on continuously, however, we recommend that you keep the timeout
delay set to less than one minute. (Note that setting the brightness to a lower setting does not
increase the life of the lamp.)
600. Classé has provided our international distributors with a software tool that
makes it possible for them to customize the translations to suit their local customs and
terminology, in an effort to ensure that the SSP-600's operation is as intuitive to use in
every country as it is in our home country of Canada.
OSD Touching the OSD button takes you to a screen on which you can select the video
system used in your country, so that the SSP-600 can create a compatible on-screen
display. The four choices are NTSC, PAL-B, PAL-M, and PAL-N. Your local Classé
dealer can assist you with selecting the appropriate setting if you have any doubt.
While choosing an incorrect OSD format will not damage any
equipment, it may disrupt your television's ability to display a picture
for the duration of the OSD's operation (typically a few seconds). You
can easily reset the OSD format to the correct setting by using the LCD
touchscreen display on the SSP-600, which will always operate correctly.
temporary on-screen display shown on your television lasts when you make a change to
the SSP-600. Your choices are none (effectively turning off these small OSD messages on
the television), and 1, 2, 3, 4, or 5 seconds.
NOTE: Anytime there is a status change, the temporary display will appear at
the bottom of the main video output screen and over the menu screen.
The menu screen will appear slightly darker or "muted" in color. When
this occurs, no selections can be made until the temp. display turns off.
volume There are two common ways of displaying the volume information in a multichannel
system.