Classe SSP-600 Manuel Du Propriétaire page 32

32 32 32
All manuals and user guides at all-guides.com
4 Input Selection
These Up and Down arrow keys will cycle through the active inputs on your SSP-
600.
If you have inputs you are not using, we suggest deactivating them in order to
provide faster, easier access to the inputs you are actually using. (See the section
The Menu System for information on how to do this.)
5 F1/F2/F3/F4 keys
F1/F2/F3/F4 keys are available for controlling aspects of the SSP-600 not covered
by the other buttons on the remote control. You are able to choose what the SSP-
600 should do in response to receiving the infrared signal that a particular Fkey
has been pressed. The list of possible functions is quite extensive, and is found in
the menu system (see the section The Menu System, in this manual).
Note: The Fkeys on all Classé remote controls issue the same infrared
commands. This saves you from having to be sure you have grabbed
the proper remote, since all your Classé remotes will perform the same
function for each Fkey.
6 Volume Keys
Volume Up, Volume Down, and Mute do what you would expect them to do.
7 Trim Key
The Trim key takes you directly to the system trims screen in the menu system.
Using the touchscreen or the remote conol navigation keys you can adjust the
speaker(s) as desired. Adjust the relative balance of the system by using the Enter
key on the remote to "press" the appropriate button on the display.