Maxi-Cosi Piazzo PY155 Mode D'emploi page 8

3
To Store Changer
Squeeze lever and hold while rotating changer to stored position (Figure 8).
To use changer, squeeze lever and hold while rotating changer up and over
to the in use position.
IMPORTANT NOTE: Review the Storage Unit Warnings
on page 1.
4
Storage Unit Assembly
Open hook-and loop patch at one side of the storage assembly. Feed the
insert into fabric, then secure hook-and-loop patch (Figure 9).
Locate the storage unit and assembly bars. Slide assembly bars into fabric
channels on top of storage unit as shown (Figure 9a).
Press the two clips onto
either short side of the
play yard with the tabs
facing the corners (Figure
9b).
Slide each end of the
storage unit assembly bars
into the corner knuckles
on either of the short sides
of the play yard as shown
(Figure 9c).
IMPORTANT NOTE: Review the Mobile
Warnings on page 1.
5
Mobile
Insert toy hanger into top of play yard arm as shown.
Press the mobile assembly into corner of the play
yard (Figure 10). NOTE: Mobile will attach to any
corner of the play yard.
To remove mobile: Lift mobile off play yard.
All manuals and user guides at all-guides.com
Assembly
6
9
9a
10
Play Yard parc
Lever
8
Tabs face out
9b
9c