Maxi-Cosi Piazzo PY155 Mode D'emploi page 7

2
Changing Station Assembly (continued)
Locate plastic tabs on each leg of the play yard, as
shown (Figure 7f).
NOTE: Match tab A with clamp A and tab B with clamp B.
1
Open clamp located on clamp arm
2
Place plastic tab into opening in clamp.
3 Press clamp around leg.
4
Close clamp lock (Figure 7g). Repeat with other
clamp arm.
Bring changer assembly to play yard, and connect
changer frame to clamp arms until pins click into place,
as shown (Figure 7h).
Squeeze changer lever and rotate changer down to
non-use position (Figure 7i).
Press changer pivots
7i), then slide tabs under knuckles (Figure 7j).
Ensure changer is secured in place. Pull on each joint to
ensure it is securely connected.
To dissasemble and uninstall changer, reverse steps
above and follow steps below.
1
To open clamp locks, pull open red locking tabs.
2
Pull clamps off leg.
3 Rotate clamps off plastic tabs
NOTE: To disengage pins, use a pointed tool to press pins
slightly. If pins are pressed too far into tubes they may
have difficulty popping back out holes.
All manuals and user guides at all-guides.com
.
D
onto rails of play yard (Figure
C
Assembly
5
1
Open
clamp
Tab
3
Press
clamp,
7f
7i
Play Yard parc
Tab
2
Tab
into
opening
4
then
lock
7g
7h
Knuckle
7j