Backrest - Quickie Life Notice D'utilisation

Backrest

Adjustable back sling, (Fig.6.23)
The adjustable back sling can be adjusted for tension by parting
the Velcro® straps and moving them through the buckles (1).
When the desired tension is achieved, press the Velcro back
together.
Repeat the process for each strap.
The back sling upholstery can be accessed from the inside via
an opening and can be padded to suit individual tastes.
WARNING!
Ensure that each strap is firmly secured before using the
wheelchair.
Fig. 6.23
Angle-adjustable fixed back, (Fig.6.24)
The angle-adjustable backrest can be set to several positions
(12° forwards maximum, then backwards in 4° steps).
By loosening and removing the screw (1) the angle can be
adjusted in stages of 4°
CAUTION!
For your own safety, adjustment work should always be carried
out by your dealer.
Fig. 6.24
1
20
All manuals and user guides at all-guides.com
Folding backrest
To make it easier to transport the wheelchair, the top half of the
backrest can be folded down.
To do this, press both levers (1) and fold the backrest down.
When folding the backrest back up, please make sure that both
sides are firmly interlocked (Fig. 6.25/6.26).
WARNING!
• Risk of injury: do not get your fingers caught in the folding
back mechanism.
CAUTION!
Please take into account the altered centre of gravity
when setting the angle of the backrest, tension of the backrest
belts or backrest height. This may lead to an unstable
wheelchair likely to tip and may rquire the use of anti-tip tubes.
Fig. 6.25
Fig. 6.26
1
Quickie Life Rev.6.0