Basic Operations; Loading Discs - Aiwa VX-F20DV1U Mode D'emploi

BASIC OPERATIONS

DISC CHANGE
DISC DIRECT OPEN/CLOSE z
PLAY
Numbered
buttons
c
34
ENGLISH
All manuals and user guides at all-guides.com
s c(PLAY)
a
DISC
a
s

Loading discs

1
Press zOPEN/CLOSE to open the disc
compartment.
2
Load disc(s) with the label side up.
To play one or two discs, place the discs on tray
1 and/or 2.
To play three discs, press DISC CHANGE to
rotate the tray after placing two discs. Place the
third disc on tray 3.
3
Press zOPEN/CLOSE to close the disc
compartment.
When a DVD or a VCD with the PBC function is
loaded, playback starts automatically.
Notes
• Some DVDs or VCDs may automatically display the
menu screen after first loading the disc. See "Using
the Software Specific Menu", page 37.
• When loading an 8-cm (3-inch) disc, put it onto the
inner circle of the tray.
• Do not place more than one disc on one disc tray.
• Do not tilt the unit with discs loaded. Doing so may
cause malfunctions.
• Do not use irregular shaped CDs such as heart-
shaped or octagonal discs. It may damage both the
unit and the disc.
If 15 minutes have elapsed without performing
any operations
This unit automatically returns to the standby
mode, when stopped without performing any
operations for 15 minutes.
1
Tray 1