Aiwa VX-F20DV1U Mode D'emploi page 47

To play back from a marked point
1 Press MARK during playback.
" " appears on the TV screen and the unit enters
the Mark mode.
2 Press j , l to move the cursor, or press a
corresponding number button (1 - 5), to select the
desired Mark memory number.
3 Press DISC ENTER or c.
Playback starts from the marked point.
To clear a marked point
1 Press MARK during playback.
" " appears on the TV screen and the unit enters
the Mark mode.
2 Press j , l to move the cursor or press a
corresponding number button (1 - 5) to select the
desired Mark memory number.
3 Press C.
The Mark memory is cleared.
Note
When the 6th DVD disc is inserted, the mark data for
the oldest disc is overwritten by the disc information of
the new disc and deleted, even when a new point is
not memorized.
All manuals and user guides at all-guides.com
You can specify the playback location of a DVD by the
title number.
This operation can be performed during playback.
1
2
3
If you specify a title number which does not exist on
the disc, the
from step 1 with a valid title number.
Title search (DVD only)
Press T-SEARCH.
T 1
Press the numbered buttons to enter the
desired title number.
T 2
Example:
To play title number 2, press 2.
To play title number 10, press +10,0.
You can also use i and k to change the selected
track number on the TV screen.
If you entered a wrong number
Press C to remove the number you entered. Then
enter the correct number.
Press DISC ENTER or c.
Playback begins at the specified title.
Note
symbol is displayed. In this case, repeat
47
ENGLISH