Aiwa VX-F20DV1U Mode D'emploi page 51

Changing audio tracks (DVD only)
Some DVDs have more than one audio track, such as
soundtracks in different languages. You can change the
audio track when playing such discs.
Press AUDIO SELECT during playback.
Each time you press the button, the audio track will
change.
1/2hD
JA
2/2hD
EN
Notes
• The audio track can be changed only if the disc
contains multiple audio tracks. The number of available
audio tracks varies with the disc.
• The audio track language first played is specified by
the audio language setting and can be changed (see
"Audio Language", page 55). If the preferred audio
track language is not available on the disc, the disc
will determine which audio track language is played.
All manuals and user guides at all-guides.com
One of the following will be displayed by pressing
DISPLAY.
• hD: Dolby Digital signal.
Signal type
information
• dts: DTS signal.
• LPCM: Linear PCM signal. The sampling frequency and
• KARAOKE: Karaoke signal. The currently active vocal
• MPEG: MPEG audio signal.
Signal type information
The numbers below indicate the number of front and
rear audio channels. For example,
"2/0" = [Conventional stereo] two front channels (left
and right) and no rear channel
"3/2.1" [5.1-channel surround] = three front channels
(left, right and center), two rear channels (left rear
and right rear) and LFE (Low Frequency Effects).
the D/A conversion bits are displayed below, such as
"48k 16bit".
track is displayed below, such as "VOCAL 1 + 2".
51
ENGLISH