Aiwa VX-F20DV1U Mode D'emploi page 58

CUSTOMIZING DVD SETUP (CONTINUED)
DTS OUTPUT
CAUTION
If the AV amplifier is not equipped with a DTS
decoder, do not select "dts" in the "Audio
Output Setting" when connecting the AV
amplifier with an optical connecting cord.
Merely attempting to play a DVD may cause a high
level of noise which could be harmful to your ears
and damage the speakers. In such a case, be sure
to select "Downmix PCM".
Sets the dts output according to whether the connected
amplifier contains a DTS decoder or not.
The default setting is "dts OFF".
1 Select "Audio Output Setting" in the setup
menu. Then press DISC ENTER.
2 Select "dts Output" and press DISC ENTER.
3 Select the setting suited to your
configuration and press DISC ENTER.
dts Output
Choose The Item ik
1 dts ON
2 dts OFF
ENTER : Choose item RETURN : Previous menu
SETUP : Completion
"dts ON"
Select this option if the unit is connected to an
amplifier with a DTS decoder.
"dts OFF"
Select this option if the unit is connected to an
amplifier without a DTS decoder.
4 Press RETURNv to return to the previous
screen or press SETUP/TM to exit the setup
menu.
58
ENGLISH
All manuals and user guides at all-guides.com
DOWNMIX TYPE
Sets the downmix type of signals output from DIGITAL
AUDIO OUT (OPTICAL) terminal and the OUTPUT R-
AUDIO-L jacks. It functions basically when "Downmix
PCM" is selected in "Digital Stream".
The default setting is "Stereo Mode".
1 Select "Audio Output Setting" in the setup
menu and press DISC ENTER.
2 Select "Downmix Type" and press DISC
ENTER.
3 Select the setting and press DISC ENTER.
Downmix Type
Choose The Item ik
1 Stereo Mode
2 Surround Mode
ENTER : Choose item RETURN : Previous menu
SETUP : Completion
"Stereo Mode"
Downmixes to conventional two channel stereo.
"1" in the display window lights up.
"Surround Mode"
Downmixes to two channel stereo with Surround
effect. This option functions on the signals output
from the OUTPUT R-AUDIO-L jacks even if
"DOLBY DIGITAL" is selected in "Digital Stream".
Selecting this option with Dolby Surround mode
"on" will enhance the Surround effect.
"1" in the display window flashes.
4 Press RETURNv to return to the previous
screen or press SETUP/TM to exit the setup
menu.