Aiwa VX-F20DV1U Mode D'emploi page 48

MARKING AND SEARCHING (CONTINUED)
Chapter search (DVD only)
You can specify the playback location of a DVD by the
chapter number.
This operation can be performed during playback.
1
Press T-SEARCH twice.
T 2 C 1
2
Press the numbered buttons to enter the
desired chapter number.
T 2 C 1 7
Example:
To play chapter number 17, press +10, 7.
You can also use i and k to change the selected
track number on the TV screen.
If you entered a wrong number
Press C to remove the number you entered. Then
enter the correct number.
3
Press DISC ENTER or c.
Playback begins at the specified chapter.
Note
If you specify a chapter number which does not exist
on the disc, the symbol is displayed. In this case,
repeat from step 1 with a valid chapter number.
48
ENGLISH
All manuals and user guides at all-guides.com
Time search (DVD only)
With DVDs that support display of elapsed time, you
can locate a point in the disc by specifying the time
from the beginning of this disc.
This operation can be performed during playback.
1
Press T-SEARCH 3 times.
00:00:00
2
Press the numbered buttons to enter the
time of the desired location.
01:17:30
Example:
To specify 1:17:30 (1 hour 17 minutes 30 seconds),
press 1, 1, 7, 3 and 0.
To specify 0:08:07 (8 minutes 7 seconds), press 8,
0 and 7.
If you entered the wrong numbers
Press C repeatedly to remove the numbers you
entered. Then enter the correct numbers.
3
Press DISC ENTER or c.
Playback begins at the specified location.
Notes
• If you specify a time greater than the length of the
disc, the symbol is displayed. In this case, repeat
from step 1 with a valid time.
• Time search may not work with some discs even if
they support display of elapsed time.